Geyserwise MAX
Approved in terms of ESKOM solar rebate program. The one control that does it all
With Intelligent control Save Electricity.
Features:
|
· Replaces the conventional thermostat with a digital system.
· Digital water temperature reading/setting. Four settings per day.
· Control your geyser from the controller
· Convenient to operate.
· Microprocessor Intelligent Control.
· Quick and steady water temperature control.
· Power off memory timer.
· Earth leakage protection.
· High temperature cut out at 85 degrees centigrade. |
· Element failure detection.
· Leading hot water pipe detection.
· Scale build-up detection.
· Probe failure detection.
· Load shifting capability to off peak periods.
· Real-time clock.
· Four daily programmable time settings, Monday to Friday, Saturday and Sundays.
· Battery backup on power failure. |
Technical Specifications:
REPLACE CONVENTIONAL THERMOSTAT
TESTED BY SABS COMMERCIAL (PTY)LTD IN TERMS OF STANDARD IEC 60950
|
AVERAGE OPERATING VOLTAGE |
|
AC 220V / 50HZ |
| |
|
|
|
OPERATING VOLTAGE RANGE |
|
AC 160V TO 250V |
| |
|
|
|
MAXIMUM CURRENT |
|
30 AMPERE |
| |
|
|
|
EARTH LEAKAGE PROTECTION |
|
25mA, Action time = 0.1s |
| |
|
|
|
TEMPERATURE DISPLAY |
|
0 TO 99° C |
| |
|
|
|
TEMPERATURE SETTING RANGE |
|
30 TO 75° C |
| |
|
|
|
MAXIMUM TEMPERATURE |
|
85° C |
| |
|
|
|
BI-POLAR RELAY |
|
ISOLATE ELEMENT IN OFF POSITION |
For safety reasons and to avoid any further damage the unit will display an error code and shut the system down under the following conditions
-
Earth Leakage
-
Element Failure
-
Overheating > 85°C
-
Sense Heat Failure e.g. scale build-up, leaking pipes
-
Probe Failure
Supports telephone remote control on/off, ability to interface with alarm systems.
Geyserwise_MAX_Manual.pdf
| 
